Two suggestions are outlined which are aimed at improving the efficiency of work in experimental areas by improving the information available to experimenters. A very good communication system would make work as efficient as possible during times when the beam is off. Here are some ideas: (1) it should be a dedicated system that is always on or can be turned on from either position, and it should be impossible for the two ends to be on different channels; (2) tv is desirable so each individual can watch what the other is doing to avoid confusion; (3) slave CRT units would be desirable so both can watch a given waveform or other test signal; and (4) it should also be possible to monitor key voltages from either location. It seems reasonable that beam information would be stored in one or more files on a disc in the on-line computer system. Each experimenter's computer could then get whatever information was desired. Handling the information by computer is straightforward, and more or less standard systems for data-base management should be applicable. Having satisfactory sensors to monitor the information that is needed seems like more of a problem, but they are required in any case. (ERA citation 02:034968)
展开▼