Research in Radiation Monitoring Survey Instrumentation. Final Report

摘要

Two low-power solid-state prototype readout units were developed, an LED display and a LCD display. This display output was in a bar-graph format, covering four-decades of information, with 10-segments per decade. The displays accept a frequency input, which is standardly available from several portable radiation-survey instruments. Both readout units will operate on two D-cell batteries (3.0 Volt), with a typical current drain requirement of 0.3 MA for the LED display and 30 mu A for the LCD display. A wide-range electrometer circuit was also developed. The circuit covers an input current range from 10 exp -13 A to 10 exp -8 A. The output signal is a pulse whose frequency is directly proportional to input current. The circuit requires no high-megohm resistors, and is autoranging. Several candidate input amplifiers were analyzed and evaluated for use with the electrometer circuit. (ERA citation 03:037913)