North Wind Power Company 2-Kilowatt High-Reliability Wind System. Phase I: Design and Analysis Executive Summary

摘要

The results of Phase I of a program to design a 2kw high reliability wind turbine for use in remote locations and harsh environments are presented. A predecessor of the proposed design was procured and tested in a wind tunnel and in the freestream to observe operational characteristics. An analytical procedure was developed for designing and modelling the proposed variable axis rotor control system (VARCS). This was then verified by extensive mobile testing of pre-prototype components. A new low speed three phase alternator with a Lundel type rotor was designed. Prototypes were fabricated and tested to refine calculation procedures and develop an effective alternator with appropriate characteristics. A solid state field switching regulator was designed and tested successfully. All necessary support elements were designed and engineered. A complete analysis of system reliability was conducted, including failure mode and effects analyses and reliability, maintenance and safety analyses. Cost estimates were made for a mature product in production rates of 1000 per year. Analysis and testing conducted throughout the first phase is included in this report. Final prototype fabrication and testing will be covered in a subsequent Phase II report.