30-Day Continuous Pumping Test: M-Area Production Test Well (MPTW-1), October 18-November 17, 1982

摘要

The analysis of the 30-day pumping test indicates that the formation is more transmissive than calculated from the 3-day pumping test data and that the well is capable of pumping at a higher discharge rate. The radius of the cone of depression after pumping 30-days at 30 gpm is 350 feet versus a previously calculated value of 400 feet from the 3-day test. The results of chemical analyses of water samples taken during the test period indicate average total organic (triclene + perclene) concentrations of approximately 350 ppM are present within the area of influence of the pumping well. The pH of the water ranged between 3.4 and 3.8 and the nitrogen content was about 60 ppM.