首页> 美国政府科技报告 >Fabrication and Metallurgical Properties of Modified 9 Cr-1 Mo Steel

【24h】

Fabrication and Metallurgical Properties of Modified 9 Cr-1 Mo Steel

机译：改性9 Cr-1 mo钢的制备及冶金性能

获取原文

页面导航

摘要
著录项
相似文献
相关主题

摘要

A newly developed modified 9 Cr-1 Mo steel has good potential as a replacement for 2 1/4 Cr-1 Mo steel because of its high strength and creep rupture properties at elevated temperatures. Melting, fabrication, mechanical properties, and operating experience in power plants are discussed. Cost comparisons between modified 9 Cr-1 Mo and 2 1/4 Cr-1 Mo steel are also presented. 15 refs., 12 figs., 4 tabs. (ERA citation 10:034106)

著录项

作者
Jawad, M.; Sikka, V. K.; Patriarca, P.;
展开▼
作者单位

展开▼
年度 1985
页码 1-25
总页数 25
原文格式 PDF
正文语种 eng
中图分类工业技术;
关键词
Charpy Test; Chemical Composition; Chromium-Molybdenum Steels; Comparative Evaluations; Cost Benefit Analysis; Crack Propagation; Cracks; Creep; Ductility; Experimental Data; Fatigue; Hardness; Impact Strength; Melting; Microstructure; Niobium Additions; Quench Hardenin;

机译：夏比试验;化学成分;铬钼钢;对比评价;成本效益分析;裂纹扩展;裂纹;蠕变;延展性;实验数据;疲劳;硬度;冲击强度;熔化;微观结构;铌添加;淬火硬化;

相似文献

外文文献
中文文献
专利

1. Effect of Modified Postweld Heat Treatment on Disbonding of 2.25 Cr-1 Mo Steel Overlay Welded with Austenitic Stainless Steel [J] . Toshiko Shinya, Yoshiyuki Tomita Zeitschrift fur Metallkunde . 1997,第7期

机译：改进的后焊热处理对奥氏体不锈钢焊接的2.25 Cr-1 Mo钢堆焊层剥离的影响
2. Effect of microstructure on hydrogen diffusion and trapping in a modified 9%Cr-1%Mo steel [J] . C. Hurtado Norena, P. Bruzzoni Materials Science and Engineering . 2010,第3期

机译：组织对改性9％Cr-1％Mo钢中氢扩散和俘获的影响
3. Comparison of Mechanical and Metallurgical Properties of Modified 9Cr-1Mo Steel for Conventional TIG and A-TIG Welds [J] . Dhandha Kamal H., Badheka Vishvesh J. Transactions of the Indian Institute of Metals . 2019,第7期

机译：传统TIG和A-TIG焊缝改性9CR-1MO钢机械和冶金特性的比较
4. Microstructural Evolution and Mechanical Properties of Modified 9 percent Cr-1 percent Mo Steel upon Isothermal Heat-Treatment [C] . Sung Kang Hur, Keesam Shin, Junghoon Yoo Pacific Rim International Conference on Advanced Materials and Processing . 2005

机译：在等温热处理时改性9％CR-1％MO钢的微观结构演化与力学性能
5. A METALLURGICAL STUDY OF THE OXIDATIONAL THEORY OF MILD WEAR IN STAINLESS STEEL AND SURFACE MODIFIED STAINLESS STEEL (ION IMPLANTATION) [D] . HONG, HYUN-SOO. 1986

机译：不锈钢和表面改性不锈钢（离子注入）中轻度磨损氧化理论的冶金学研究
6. Metallurgical and Electrochemical Properties of Super Duplex Stainless Steel Clads on Low Carbon Steel Substrate produced with Laser Powder Bed Fusion [O] . Pratik Murkute, Somayeh Pasebani, O. Burkan Isgor -1

机译：激光粉末床熔合制备低碳钢基底上的超级双相不锈钢熔覆层的冶金和电化学性能
7. Creep properties of modified 9 Cr-1 Mo steel [O] . V.K. Sikka, M.G. Cowgill, B.W. Roberts 1983

机译：改性9 CR-1 MO钢的蠕变性能

Fabrication and Metallurgical Properties of Modified 9 Cr-1 Mo Steel

摘要

著录项

相似文献

相关主题

期刊订阅