Determination of Lead, Zinc, and Magnesium in Dolomite and Its Benefication Products by Use of X-Ray-Fluorescence Spectrometry

摘要

An investigation was undertaken on the development of fast, simple, and accurate methods of analysis for lead and zinc in tailings and middlings from dolomite, and for lead, zinc, and magnesium in concentrates obtained from dolomite. A pressed-powder technique and X-ray-fluorescence spectrometry (XRFS) were used. Good agreement was found between the XRFS values for lead and zinc in low concentrations and the values obtained by other techniques of analysis when the calibration for the XRFS method was effected by the use of synthetic standards comprising lead and zinc oxides in a dolomite matrix. For high concentrations of the analytes, all the oxides and sulphides of lead and zinc in the samples had to be converted to the sulphate form, and a matrix correction had to be applied to the assigned values of the oxide calibration standards. The lower limits of detection for lead, zinc, and magnesium were 0,004, 0,003, and 0,18 per cent respectively. The recommended methods are detailed in two appendices. (Atomindex citation 17:021006)