Trade-Offs in Size, Quantity and Reliability of Generalized Nuclear Power Plants: A Preliminary Assessment

摘要

An approximate method is used to estimate the effects of system reliability on optimal nuclear plant size, taking into account also scale factors and manufacturing learning curve slopes. The method is used to estimate the additional effective capability gained by adding units of different sizes to an existing electrical system. The number of additional units proves to be sensitive to forced outrage rate, estimated here from trends in US light-water reactors from 1971 to 1980. The relative cost of added units ranging in size from 200 to 800 MW is determined as a function of the parameters: scale factor and learning curve slope. The results generally corrobate the trends found in an earlier study in which the effect of reliability on required installed capacity was not explicitly considered. Optimal plant size decreases with weaker scale effects and stronger learning curve effects. Reliability considerations further reduce the optimal plant size, but the relative reduction is apparently not as great with steeper learning curves. This is a plausible finding inasmuch as the reduction in numbers of additional units due to reliability considerations will affect cost most where the learning curve is steepest. 9 refs., 4 figs., 3 tabs. (ERA citation 10:033646)