Effect of Rapid Solidification on Stainless Steel Weld Metal Microstructures and Its Implications on the Schaeffler Diagram

摘要

An investigation was carried out to determine the effect of rapid solidification on the weld metal microstructure of austenitic stainless steels and its implication on the ferrite constitution diagram. A wide variety of stainless steels were laser welded at different welding speeds and laser power levels. Results indicate that both weld pool cooling rate and the postsolidification solid state cooling rates have a profound effect on the microstructures. For the steels investigated, the microstructures ranged from duplex austenite ( gamma ) + ferrite (delta) to fully austenitic or fully ferritic. These microstructures were found to be sensitive to both cooling rates and composition. The observed results are rationalized based on rapid solidification theory. This investigation indicates that solidification rates and postsolidification cooling rates have a profound effect on the observed microstructures, thus making it impossible to predict the microstructures of rapidly cooled weld metal from the conventional constitution diagrams. The influence of the observations made in this investigation on the Schaeffler diagram is demonstrated, and possible corrections to the constitution diagram incorporating the cooling rate effects are proposed. 23 refs., 17 figs., 4 tabs. (ERA citation 13:003715)