Studies on Structural Analysis Related to the Design of the JT-60 Vacuum Vessel

摘要

Studies on structural analysis of a vacuum vessel of tokamak-type fusion devices are presented. The present studies are proposals for the structural analysis procedures of the tokamak-type fusion devices and are composed of five parts, each of which covers the fundamental area required for the structural analysis and design; stress analysis, dynamic response analysis, fatigue evaluation, buckling analysis and seismic analysis. Special attention is paid to the critical component, bellows and the critical load, electromagnetic forces. A new finite element method modeling technique is proposed for the stress analysis of U-shaped bellows, where the bellows is replaced by an orthotropic plate having the same stiffness as the bellows. The applicability of the present modeling technique is confirmed by verification tests. Dynamic response and fatigue of the vacuum vessel are critical issues of the structural analysis and design of the tokamak-type fusion devices. Detailed dynamic response analyses of the JT-60 vacuum vessel are presented paying special attention to the dynamic behavior of the U-shaped bellows, where the above-mentioned modeling technique of the U-shaped bellows is applied. A fatigue evaluation method of the vacuum vessel under the dynamic electromagnetic forces is proposed, which utilizes the results of the detailed dynamic response analysis. In the present method, fatigue evaluation method for random loads is applied. Torsional fatigue strength of the welded bellows is experimentally evaluated aiming the application to the port of the fusion device and it is shown that the welded bellows reveals elastic buckling and spiral distortion under a small angle of tortion. Two formulae are proposed to evaluate the stress of the welded bellows under the forced angle of tortion. (ERA citation 13:002669)