Post-Test Calculations of out-of-Pile Single Rod Burst Experiments with Argentine ZRY-4 Tubes Using SSYST Codes System

摘要

The calculations were performed with SSYST-3 code system. The experiments have been carried out with shortened REBEKA simulators. The main goal was to verify whether the model for describing the Zircaloy cladding deformation and rupture at high temperatures (NORA2 model) is able to predict the Argentine cladding material behaviour under such conditions. A good agreement between experimental results and model predictions was found in the range of temperatures from 700 to 850/sup 0/C (in alpha phase and first half of alpha + beta transition phase). There were some discrepances at higher temperatures, probably due to the strong influence of heating rate on material properties. According to the results of these post-test calculations, it can be concluded that NORA2 model is able to well describe the Argentine Zircaloy cladding deformation and rupture under LOCA conditions, because there was a good agreement in the range of burst (ballooning) temperatures which are expected in this type of accident. (ERA citation 14:017538)