Leach Tests on Grouts Made with Actual and Trace Metal-Spiked Synthetic Phosphate/Sulfate Waste.

摘要

Pacific Northwest Laboratory conducted experiments to produce empirical leach rate data for phosphate-sulfate waste (PSW) grout. Effective diffusivities were measured for various radionuclides ((sup 90)Sr, (sup 99)Tc, (sup 14)C, (sup 129)I, (sup 137)Cs, (sup 60)Co, (sup 54)Mn, and U), stable major components (NO(sub 3)(sup (minus)), SO(sub 4)(sup 2(minus)), H(sub 3)BO(sub 3), K and Na) and the trace constituents Ag, As, Cd, Hg, Pb, and Se. Two types of leach tests were used on samples of actual PSW grout and synthetic PSW grout: the American Nuclear Society (ANS) 16.1 intermittent replacement leach test and a static leach test. Grout produced from both synthetic and real PSW showed low leach rates for the trace metal constituents and most of the waste radionuclides. Many of the spiked trace metals and radionuclides were not detected in any leachates. None of the effluents contained measurable quantities of (sup 137)Cs, (sup 60)Co, (sup 54)Mn, (sup 109)Cd, (sup 51)Cr, (sup 210)Pb, (sup 203)Hg, or As. For those trace species with detectable leach rates, (sup 125)I appeared to have the greatest leach rate, followed by (sup 99)Tc, (sup 75)Se, and finally U, (sup 14)C, and (sup 110m)Ag. Leach rates for nitrate are between those for I and Tc, but there is much scatter in the nitrate data because of the very low nitrate inventory. 32 refs., 6 figs., 15 tabs.