Study of heat transfer for two layered composite inclined plate crotch absorbers.

摘要

Since a copper plate (Z=29) absorbs most of the photon energy very near the surface, the temperature of the surface becomes very high despite of having a high thermal conductivity. On the other hand, a beryllium plate( Z=4) can diffuse the intense radiation throughout the depth of its plate by allowing photons to penetrate, but has a low thermal conductivity (about half of that of a copper). As an effort to combine both merits of Be and Cu, a Be-Cu composite absorber was developed and has been successfully used in CESR. They analyzed composite the heat transfer problem numerically for the case of a vertically located Be-Cu composite cylinder which results in symmetry with respect to the center of photon beam and allows them to consider only half a domain. In this note, an inclined absorber with two layered metal plates is considered and a full domain solution is sought to study the asymmetric heating due to the inclined photon beam penetration heating. An analytical solution for heat transfer is obtained for a full domain using the Fourier integral transformation and of particular interests are the effects of different thickness ratios of two materials and different inclination angles.