FIRINPC and FIRACPC graphics post-processor support user's guide and programmer's reference

摘要

FIRIN is a computer program used by DOE fire protection engineers to simulate hypothetical fire accidents in compartments at DOE facilities. The FIRIN code is typically used in conjunction with a ventilation system code such as FIRAC, which models the impact of the fire compartment upon the rest of the system. The code described here, FIRINPC is a PC based implementation of the full mainframe code FIRIN. In addition, FIRINPC contains graphics support for monitoring the progress of the simulation during execution and for reviewing the complete results of the simulation upon completion of the run. This document describes how to install, test, and subsequently use the code FIRINPC, and addresses differences in usage between the PC version of the code and its mainframe predecessor. The PC version contains all of the modeling capabilities of the earlier version, with additional graphics support. This user's guide is a supplement to the original FIRIN report published by the NRC. FIRAC is a computer program used by DOE fire protection engineers to simulate the transient response of complete ventilation system to fire induced transients. FIRAC has the ability to use the FIRIN code as the driving function or source term for the ventilation system response. The current version of FIRAC does not contain interactive graphics capabilities. A third program, called POST, is made available for reviewing the results of a previous FIRIN or FIRAC simulation, without having to recompute the numerical simulation. POST uses the output data files created by FIRINPC and FIRACPC to avoid recomputation.