Structures and Materials Panel Working Group 27 on Evaluation of Loads fromOperational Flight Maneuvers. Final Working Group Report (l'Evaluation des Charges Resultant des Manoeuvres en vol)

摘要

This AGARD Advisory Report describes an evaluation of a method to derive loadsfrom operational flight maneuvers. The basic assumption of this method is that all operational maneuvers performed in service can be verified as a set of Standard Maneuvers (normalized parameter time histories for each independent maneuver type). The normalization procedure has been developed and applied to the data base for 3 GAF-aircraft in operation and one aircraft in development. The verification of Standard Maneuvers is based on recordings of relevant maneuver parameters in service and for new tactics/missions on special flights or simulations. For the verification process, data from the USAF and CF maneuver types have been identified and normalized. The comparison of the normalized maneuvers for several aircraft types leads to similar parameter time histories for the same maneuver type. The study has demonstrated for two Standard Maneuver types that load relevant parameters can be derived with sufficient accuracy for