Passive Standoff Detection of SF6 Plumes at 500 Meters. Measurement Campaign to Support the Evaluation of Telops Imaging Spectrometer (FIRST)

摘要

This note reports the results of a data collection campaign performed with the CATSI sensor to measure the detectability, identification and column density of a SF6 plume. The measurements were made simultaneously with the Telops imaging sensor known as FIRST. The objective of this measurement campaign was to provide a validation of the Telops FIRST spectrometer. Measurements were taken at the 500 m open-air corridor at DRDC Valcartier on September 29, 2004.