Eddy Current Assessment of Near-Surface Residual Stress in Shot-Peened Inhomogeneous Nickel-Base Superalloys

摘要

Recently, it has been shown that shot-peened nickel-base superalloys exhibit an approximately 1% increase in apparent eddy current conductivity at high inspection frequencies, which can be exploited for nondestructive subsurface residual stress assessment. Unfortunately, microstructural inhomogeneity in certain as-forged and precipitation hardened nickel-base superalloys, like Waspaloy, can lead to significantly larger electrical conductivity variations of as much as 4 6%. This intrinsic conductivity variation adversely affects the accuracy of residual stress evaluation in shot- peened and subsequently thermal relaxed specimens, but does not completely prevent it. Experimental results are presented to demonstrate that the conductivity variation resulting from volumetric inhomogeneities in as-forged engine alloys do not display significant frequency dependence. This characteristic independence of frequency can be exploited to distinguish these inhomogeneities from near surface residual stress and cold work effects caused by surface treatment, which, in contrast, are strongly frequency-dependent.