Establishing a Common Phase Reference for Comparing Synthetic Data to RF Range Measurements

摘要

Discrepancies can result when creating common data sets consisting of comparable synthetic and measured range complex scattered field samples when the phase references of each do not coincide. This can be especially true when using signal processing techniques to produce one dimensional (range profiles) or two dimensional (Synthetic Aperture Radar or SAR images) representations of the target scattered field where range bins and cross-range bins are formed. Range profiles and SAR images can be misaligned or have different bin amplitudes due to target scatterers in synthetic and measured scenarios shifted with respect to one another. Obtaining equivalent data samples requires attention to the measured data calibration process and phase reference location. This paper will address the common phase reference problem by an analysis of experimental data for specific targets and rotation system. Suggestions are provided for possible solutions to current challenges. The data analysis will include synthetic and measured range data comparisons range calibration, and target position and range alignment processes using Theodolite laser measurements.