首页> 美国政府科技报告 >Development of Filler Wire for Welding Army Ordnance Armor by the Inert-Gas-Shielded Consumable-Electrode Process

【24h】

Development of Filler Wire for Welding Army Ordnance Armor by the Inert-Gas-Shielded Consumable-Electrode Process

机译：用惰性气体屏蔽消耗电极工艺开发焊接军用装甲用填充焊丝

获取原文

页面导航

摘要
著录项
相似文献
相关主题

摘要

No abstract available.

著录项

作者
Silverstein, S. M.; Sopher, R. P.; Rieppel, P. J.;
展开▼
作者单位

展开▼
年度 1956
页码 p.1-35
总页数 35
原文格式 PDF
正文语种 eng
中图分类工业技术;
关键词
Arc welding; Armor plate; Welding rods; Steel; Wire; Fillers; Ferrites; Strength(Mechanics); Ductility; Cracks; Notch toughness; Mechanical properties; Stresses; Misch metal; Manganese alloys; Molybdenum alloys; Nickel alloys; Titanium; Vanadium; Rare earth elements; Arm;

机译：电弧焊;装甲板;焊条;钢;线材;填料;铁氧体;强度（力学）;延展性;裂纹;缺口韧性;机械性能;应力;混合金属;锰合金;钼合金;镍合金;钛;钒;稀土元素;手臂;

相似文献

外文文献
中文文献
专利

1. Development of hot wire TIG welding methods using pulsed current to heat filler wire - research on pulse heated hot wire TIG welding processes [J] . K HORI, H WATANABE, T MYOGA Welding International . 2004,第6期

机译：脉冲电流加热填充焊丝的热丝TIG焊接方法的发展-脉冲加热热丝TIG焊接工艺的研究
2. Development of an all-position YAG laser butt welding process with addition of filler wire [J] . S FUJINAGA, R OHASHI, T URAKAMI Welding International . 2005,第6期

机译：通过添加填充焊丝开发全位置YAG激光对焊工艺
3. ALCOTEC WELD FILLER WIRE 5556 (Al-Mg-Mn-Cr-Ti Welding Filler Wire) [J] . Alloy Digest . 2002,第Juna期

机译：ALCOTEC填充焊丝5556（Al-Mg-Mn-Cr-Ti填充焊丝）
4. Process weldability and thermal modeling on INCOLOY 800: comparsion between TIG process without a filler wire and laser process [C] . Isabelle Vastra, Framatome Technical Ctr., Le Creusot, Laser Materials Processing: Industrial and Microelectronics Applications . 1994

机译：在INCOLOY 800上进行过程可焊性和热建模：不使用填充焊丝的TIG过程与激光过程之间的比较
5. Residual Stress, Hardness, and Grain Size Development During Processing in Annealed and Cold-Rolled Flat Steel Wire [D] . Gallardo, Clarissa. 2020

机译：退火和冷轧钢丝加工过程中的残余应力，硬度和晶粒尺寸
6. Weld Formation Mechanism and Microstructural Evolution of TC4/304 Stainless Steel Joint with Cu-Based Filler Wire and Preheating [O] . Junzhao Li, Yibo Liu, Zuyang Zhen, 2019

机译：铜基焊丝与预热TC4 / 304不锈钢接头的焊接形成机理及组织演变
7. Development of Hot Wire TIG Welding Methods Using Pulsed Current to Heat Filler Wire-Research on Pulse Heated Hot Wire TIG Welding Processes (Report 1)- [O] . Katsuyoshi HORI, Hiroshi WATANABE, Toshiharu MYOGA, 2003

机译：使用脉冲电流进行热线TIG焊接方法的开发热填充线 - 脉冲加热热线TIG焊接工艺研究（报告1） -
8. DETERMINATION OF THE CAUSES OF WELD-METAL CRACKING IN HIGH-STRENGTH STEELS AND THE DEVELOPMENT OF HEAT-TREATABLE LOW-ALLOY-STEEL FILLER WIRES FOR USE WITH THE INERT-GAS-SHIELDED ARC-WELDING PROCESS [R] . Herbert W. Mishler, Robert E. Monroe, Perry J. Rieppel 1960

机译：高强钢焊接金属开裂原因的确定及可热处理低合金钢焊丝的研制及其与惰性气体保护焊的应用

Development of Filler Wire for Welding Army Ordnance Armor by the Inert-Gas-Shielded Consumable-Electrode Process

摘要

著录项

相似文献

相关主题

期刊订阅