Experimental Stress Analysis of Model of Emergency Forebody Release Device Used in Deep Diving Research Submarines Alvin, Sea Cliff and Turtle

摘要

Tests were conducted on a full-scale model of the emergency forebody release used in the deep-diving submarines ALVIN, SEA CLIFF and TURTLE. The model was machined from metal to the same dimensional tolerances as the prototype. Resistance strain gages, attached to the model, permitted measurement of forces on component parts of the device. Of primary concern was the bending stress which might be set up in the release operating shaft when the submarine is submerged in an inclined position. Tests were arranged to simulate three possible conditions of loading of the release device at a 30 degree vehicle list angle. (Author)