首页> 美国政府科技报告 >Design and Analysis of a Self-Generated Hydrostatic Support for an Air Bearing Gyro

【24h】

Design and Analysis of a Self-Generated Hydrostatic Support for an Air Bearing Gyro

机译：空气轴承陀螺仪自生静液压支架的设计与分析

获取原文

页面导航

摘要
著录项
相似文献
相关主题

摘要

The device is a cam-driven, positive-displacement piston pump with positive-acting valves, implemented integrally within a gyro spinmotor. (Author)

著录项

作者
Rood, L. H.;
展开▼
作者单位

展开▼
年度 1971
页码 p.1-16
总页数 16
原文格式 PDF
正文语种 eng
中图分类
关键词
Gyroscopes ; Gas pumps ; Gas bearings ; Supports ; Gimbals ; Design;

机译：陀螺仪;气泵;气体轴承;支撑;万向节;设计;

相似文献

外文文献
中文文献
专利

1. Feasibility Study on Design of Spindle Supported by High-Stiffness Water Hydrostatic Thrust Bearing [J] . Yohichi Nakao, Kenji Suzuki, Kohei Yamada, International journal of automation technology . 2014,第4期

机译：高刚度水静压推力轴承支承主轴设计的可行性研究
2. Development of a Linear-motor-driven Table Supported by Hydrostatic Water Bearings: Effect of Air Volume Contained in Water-supply Tube on Pitching Motion of Table Slider [J] . Akinori Yui, Go Okahata, Shigeki Okuyama, Key Engineering Materials . 2010,第期

机译：静水轴承支撑的直线电机驱动工作台的开发：供水管中的风量对工作台滑块的俯仰运动的影响
3. CFD-based design and analysis of air-bearing-supported paint spray spindle [J] . Ali Khaghani, Kai Cheng 纳米技术与精密工程（英文） . 2018,第004期

机译：基于CFD的气浮式喷漆主轴的设计与分析
4. Numerical Modelling and Analysis of Hydrostatic Thrust Air Bearings for High Loading Capacities and Low Air Consumption [C] . Yunluo Yu, Guang Pu, Kyle Jiang International Conference on Mechanical Engineering and Automation Science . 2018

机译：高负荷能力静压推力空气轴承的数值建模与分析及低空气消耗
5. Design and Experimental Study of Hydrostatic Thrust Air Foil Bearing [D] . Song, Myongsok. 2018

机译：静压推力翼型轴承的设计与试验研究
6. Performance Testing of a Magnetically Suspended Double Gimbal Control Moment Gyro Based on the Single Axis Air Bearing Table [O] . Peiling Cui, Huijuan Zhang, Ning Yan, 2012

机译：基于单轴空气轴承表的磁悬浮双云台控制力矩陀螺的性能测试
7. Analysis of Damping Characteristics of Hydrostatic Air Bearing by Using One-Dimensional Bearing Model. 1st Report. Damping Characteristics of a Bearing with Two Feeding Hole Restrictions. [O] . Hiroshi YAMAMOTO, Kyosuke ONO 1992

机译：用一维轴承模型分析静压空气轴承的阻尼特性。第一个报告。具有两个馈电孔限制的轴承的阻尼特性。
8. Analysis, Design and Prototype Development of Squeeze Film Bearings for Ab-5 Gyro. Phase 5 - Development of an Integral Design Prototype Squeeze Film Bearing Supporting a Live Ab-5 Gyro Float Final Report [R] . Chiang, T., Hoogenboom, L. 1969

机译：ab-5陀螺挤压薄膜轴承的分析，设计与原型开发。第5阶段 - 开发整体设计原型挤压薄膜轴承，支持实时ab-5陀螺仪浮动最终报告

Design and Analysis of a Self-Generated Hydrostatic Support for an Air Bearing Gyro

摘要

著录项

相似文献

相关主题

期刊订阅