Mechanical-Property Data Ti-6Al-4V Alloy, Powder Metallurgy Product CHIP

摘要

This Ti-6Al-4V alloy, a powder metallurgy product from Dynamet Technology, was received as sixty 5/8 in. diameter x 5 in. bars, seven 0.125 in. x 2 in. x 12 in. strips, and nine 3/4 in. x 3 in. x 3 in. blanks. The chemical composition of this lot is presented. Results of processing and heat treating show slightly lower strength values than for the wrought annealed material. The tensile and compression results were slightly lower while the bearing and shear results were slightly higher.