...
首页> 外文期刊>Biomaterials >Characterization of permeability and network structure of interfacially photopolymerized poly(ethylene glycol) diacrylate hydrogels.
【24h】

Characterization of permeability and network structure of interfacially photopolymerized poly(ethylene glycol) diacrylate hydrogels.

机译:界面光聚合聚(乙二醇)二丙烯酸酯水凝胶的渗透性和网络结构的表征。

获取原文
获取原文并翻译 | 示例
   

获取外文期刊封面封底 >>

       

摘要

Hydrogel membranes formed by interfacially photopolymerizing poly(ethylene glycol) (PEG) diacrylate precursor solution were prepared from PEG diacrylate of molecular weights (MW) ranging from 2000 (2K) to 20000 (20K) with concentrations ranging from 10% to 30% w/w. The effects of PEG diacrylate MW and concentration in the membrane precursor solution upon the diffusivities of vitamin B12, myoglobin, ovalbumin, albumin, and IgG were determined. Regardless of the concentration of the PEG diacrylate in the precursor solution, hydrogels prepared with PEG 2K, 4K, and 8K diacrylate were impermeable to proteins with a size equal to or larger than myoglobin (22 kDa), while hydrogels prepared with PEG 20K diacrylate were impermeable to proteins with a size equal to or larger than ovalbumin (45 kDa). Similarities between hydrogels formed from PEG 2K, 4K, and 8K diacrylates were also seen in calculations of the molecular weight between crosslinks and the mesh size, with values in the range of 150-750 g/mol and 15-35 A, respectively, depending on PEG diacrylate concentration. In contrast, hydrogels formed from PEG 20K diacrylate had molecular weight between crosslinks ranging from 1150 to 2000 g/mol and mesh sizes ranging from 45-70 A, with larger values being observed in membranes polymerized from more dilute PEG diacrylate precursor.
机译:由分子量(MW)为2000(2K)至20000(20K)的PEG二丙烯酸酯制备了通过界面光聚合聚乙二醇(PEG)二丙烯酸酯前体溶液形成的水凝胶膜,浓度范围为10%至30%w / w。确定了PEG二丙烯酸酯分子量和膜前体溶液浓度对维生素B12,肌红蛋白,卵清蛋白,白蛋白和IgG扩散性的影响。不论前体溶液中PEG二丙烯酸酯的浓度如何,用PEG 2K,4K和8K二丙烯酸酯制备的水凝胶对于大小等于或大于肌红蛋白(22 kDa)的蛋白质都是不可渗透的,而用PEG 20K二丙烯酸酯制备的水凝胶是可渗透的。大小等于或大于卵白蛋白(45 kDa)的蛋白质不能渗透。 PEG 2K,4K和8K二丙烯酸酯形成的水凝胶之间的相似性在交联分子量和筛孔尺寸的计算中也可见,其值分别在150-750 g / mol和15-35 A范围内,具体取决于PEG二丙烯酸酯浓度。相比之下,由PEG 20K二丙烯酸酯形成的水凝胶的交联分子量介于1150至2000 g / mol之间,筛孔大小介于45-70 A之间,在由更稀的PEG二丙烯酸酯前体聚合而成的膜中观察到更大的值。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号