Effects of Temperature and Holding Time on the Sintering of Ladle Filler Sand with Liquid Steel

摘要

In the present work the effects of temperature and holding time on the sintering of ladle filler sand are studied. Laboratory experiments are carried out using pellets made of chromite based filler sand and two steel grades containing different contents of Mn and Al. It is found that the liquid steel plays a major role in the sintering behavior. The results also show that the amount of liquid phase in the sintered sand pellets increases with the increase of temperature and holding time. The Al2O3 content increases substantially in the chromite phase (spinel), especially in the region close to the liquid phase, when the temperature is high enough or when the holding time is long enough. Higher content of dissolved Al would accelerate the formation of the alumina-rich chromite.