首页> 外文期刊>Smart Materials & Structures >Intra-aneurysmal flow reductions in a thin film nitinol flow diverter
【24h】

Intra-aneurysmal flow reductions in a thin film nitinol flow diverter

机译:薄膜镍钛诺分流器的无瘤内血流减少

获取原文
获取原文并翻译 | 示例
       

摘要

A novel hyper-elastic thin film nitinol (HE-TFN) covered stent has been developed to promote aneurysm occlusion by diminishing flow in the aneurysm. Laboratory aneurysm models were used to assess the flow changes produced by stents covered with different patterns of HE-TFN placed across the aneurysm neck in the parent vessel. The flow diverters were constructed by covering Wingspan stents (Boston Scientific) with different HE-TFNs (i.e., of 82% and 77% porosity) and deployed in both in?vitro wide-neck and fusiform glass aneurysm models. In wide-neck aneurysms, the 82% porous HE-TFN stent reduced mean flow velocity in the middle of the sac by 86 ± 1%, while the 77% porous stent reduced the velocity by 93 ± 5% (n = 3). Local wall shear rates were also significantly reduced by about 98% in this model after device placement. Tests conducted on the fusiform aneurysm revealed smaller intra-aneurysmal flow velocity reduction by 48 ± 3% for the 82% porous stent and by 59 ± 7% for the 77% porous stent. The wall shear was reduced by approximately 50% by HE-TFN stents in fusiform models. These results suggest that HE-TFN covered stents have the potential to promote thrombosis in both wide-neck and fusiform aneurysm sacs.
机译:已经开发了一种新型的超弹性薄膜镍钛合金(HE-TFN)覆盖的支架,通过减少动脉瘤中的血流来促进动脉瘤的闭塞。实验室动脉瘤模型用于评估由覆盖有不同模式HE-TFN的支架所产生的血流变化,该支架放置在亲代血管的动脉瘤颈上。分流器是通过在Wingspan支架(波士顿科学公司)上覆盖不同的HE-TFN(即孔隙率分别为82%和77%)而制成的,并在体外宽颈和梭形玻璃动脉瘤模型中进行部署。在宽颈动脉瘤中,82%的多孔HE-TFN支架使囊中部的平均流速降低了86±1%,而77%的多孔支架使速度降低了93±5%(n = 3)。放置设备后,该模型中的局部壁剪切率也显着降低了约98%。对梭形动脉瘤进行的测试显示,对于82%的多孔支架,动脉瘤内流速降低较小,降低了48±3%,对于77%的多孔支架,降低了59±7%。在梭形模型中,HE-TFN支架可将壁切力降低约50%。这些结果表明,HE-TFN覆盖的支架有可能在宽颈和梭状动脉瘤囊中促进血栓形成。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号