...
首页> 外文期刊>CERAMICS INTERNATIONAL >Joining of SiC ceramics via a novel liquid preceramic polymer (V-PMS)
【24h】

Joining of SiC ceramics via a novel liquid preceramic polymer (V-PMS)

机译:通过新型液态陶瓷前体聚合物(V-PMS)连接SiC陶瓷

获取原文
获取原文并翻译 | 示例
   

获取外文期刊封面封底 >>

       

摘要

A novel liquid preceramic polymer (V-PMS) was synthsized by modifying polymethylsilane (PMS) with 1,3,5,7-tetramethy1-1,3,5, 7-tetravinylcyclotetrasiloxane ([CH3(CH2=CH)SiO](4), D4Vi), for joining SiC ceramics under ambient pressure. The obtained V-PMS with a viscosity of 125 Pas at room temperature exhibits excellent thermal properties and bonding strength. The ceramic yield of V-PMS treated at 1200 degrees C under Ar atmosphere is 84.5%, which is 38.3% higher than the original PMS. The shear strengths of the SiC joints joined by V-PMS at 800 degrees C, 1000 degrees C and 1200 degrees C under N-2 atmosphere are 11.9 MPa, 34.5 MPa and 29.9 MPa, respectively. The excellent performances make the obtained V-PMS promising candidates for joining SiC ceramics in high-temperature applications. (C) 2015 Elsevier Ltd and Techna Group S.r.l. All rights reserved.
机译:通过用1,3,5,7-四甲基1-1,3,5,7-四乙烯基环四硅氧烷([CH3(CH2 = CH)SiO](4)改性聚甲基硅烷(PMS)来合成新型液态陶瓷陶瓷聚合物(V-PMS) ),D4Vi),用于在环境压力下连接SiC陶瓷。所获得的在室温下粘度为125Pas的V-PMS表现出优异的热性能和粘合强度。在Ar气氛下在1200摄氏度下处理的V-PMS的陶瓷产率为84.5%,比原始PMS高38.3%。在N-2气氛下,V-PMS在800℃,1000℃和1200℃下通过V-PMS接合的SiC接头的剪切强度分别为11.9 MPa,34.5 MPa和29.9 MPa。优异的性能使所得的V-PMS在高温应用中有望成为连接SiC陶瓷的候选材料。 (C)2015 Elsevier Ltd和Techna Group S.r.l.版权所有。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号