...
首页> 外文期刊>CERAMICS INTERNATIONAL >Effect of BN content on the mechanical and dielectric properties of porous BNp/Si3N4 ceramics
【24h】

Effect of BN content on the mechanical and dielectric properties of porous BNp/Si3N4 ceramics

机译:BN含量对多孔BNp / Si3N4陶瓷力学性能和介电性能的影响

获取原文
获取原文并翻译 | 示例
           

摘要

Porous BNp/Si3N4 ceramics were prepared by gas pressure sintering method as a candidate wave-transparent material. The effects of BN particle additions ranging from 0 wt% to 15 wt% on the phase compositions, microstructures, mechanical performance and dielectric properties were investigated. With the increase of BN content, the apparent porosity of the BN/Si3N4 ceramics increased greatly from 2.3% to 21.2%. Although the mechanical properties were partially weaken, the dielectric performance of the porous BN/Si3N4 was largely enhanced at the same time. For the 10% BN/Si3N4 porous composite ceramics, the permittivity and dielectric loss was 33.5% and 62.2% lower than that of the porous Si3N4 without BN content, respectively. Specifically, when 10% BN particles were added, the porous BNp/Si3N4 has a porosity of 20.5% and the permittivity and dielectric loss were 5.14 and 0.0085 respectively with bending strength of 190.1 MPa and fracture toughness of 4.16 MPa m(1/2), which can meet the required value of wave transparent materials. (C) 2015 Elsevier Ltd and Techna Group S.r.l. All rights reserved.
机译:通过气压烧结法制备了多孔BNp / Si3N4陶瓷作为候选的透明材料。研究了BN颗粒添加量从0 wt%到15 wt%对相组成,微结构,机械性能和介电性能的影响。随着BN含量的增加,BN / Si3N4陶瓷的表观孔隙率从2.3%大大提高到21.2%。尽管机械性能被部分削弱,但是多孔BN / Si 3 N 4的介电性能同时被大大提高。对于10%BN / Si3N4多孔复合陶瓷,其介电常数和介电损耗分别比不含BN的多孔Si3N4降低了33.5%和62.2%。具体而言,当添加10%BN颗粒时,多孔BNp / Si3N4的孔隙率为20.5%,介电常数和介电损耗分别为5.14和0.0085,弯曲强度为190.1 MPa,断裂韧性为4.16 MPa m(1/2)。 ,可以满足透光材料的要求值。 (C)2015 Elsevier Ltd和Techna Group S.r.l.版权所有。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号