...
首页> 外文期刊>CERAMICS INTERNATIONAL >The structural and electrical properties of SrxBa(1-x)Nb2O6 (SBN) ceramic with varied composition
【24h】

The structural and electrical properties of SrxBa(1-x)Nb2O6 (SBN) ceramic with varied composition

机译:不同组成的SrxBa(1-x)Nb2O6(SBN)陶瓷的结构和电性能

获取原文
获取原文并翻译 | 示例
   

获取外文期刊封面封底 >>

       

摘要

Strontium barium niobate (SBN) with the stoichiometric formula of SrxBa((l-x))Nb(2)O(6) was synthesized using the solid-state reaction method.The compositions were varied as x=0.25, 0.30, 0.50, 0.51, 0.53, 0.55, 0.57 and 0.60 to identify the composition with the optimum structural and electrical properties. The structural properties of the SBN ceramic were studied using X-ray diffraction spectra, while the morphology of the sintered grain was monitored by a field emission scanning electron microscope (FESEM) measurement. The dielectric behavior and the main features of the diffuse phase transition of the SBN ceramics with relaxor behavior were carefully investigated. The increment of the x composition gives rise to continuous decrease of the temperature of the maximum dielectric constant. The effect of the diffuse phase transition and relaxation feature of the SBN can be attributed to the Sr2+ (variation of x composition) site distribution. The SBN ceramic with composition x=0.53 showed a saturated hysteresis loop at an applied field of 50 kV/cm, showing the highest remnant polarization of 8.17 mu C/cm(2) with a coercive field of 11 kV/cm. The leakage current densities of the SBN samples were ranged between 0.1 and 1 x 10(-5) A/m(2) over a voltage range from 100 V to 6 kV. From these findings, the composition of x=0.53, gives the best electrical and structural properties compared to the rest of the compositions investigated and has potential application for practical lead free ferroelectric sensors. (C) 2015 Elsevier Ltd and Techna Group S.r.l. All rights reserved.
机译:采用固态反应法合成化学计量比为SrxBa((lx))Nb(2)O(6)的铌酸锶钡(SBN),其组成为x = 0.25,0.30,0.50,0.51, 0.53、0.55、0.57和0.60,以确定具有最佳结构和电性能的成分。使用X射线衍射光谱研究了SBN陶瓷的结构性能,同时通过场发射扫描电子显微镜(FESEM)测量来监测烧结晶粒的形貌。仔细研究了具有弛豫行为的SBN陶瓷的介电行为和扩散相变的主要特征。 x组成的增加导致最大介电常数的温度连续降低。 SBN的扩散相变和弛豫特征的影响可以归因于Sr2 +(x组成的变化)位点分布。组成x = 0.53的SBN陶瓷在50 kV / cm的外加电场下显示出饱和磁滞回线,显示出最高残余极化强度为8.17μC / cm(2),矫顽场为11 kV / cm。在100 V至6 kV的电压范围内,SBN样品的泄漏电流密度在0.1到1 x 10(-5)A / m(2)之间。根据这些发现,x = 0.53的成分与所研究的其余成分相比,具有最佳的电气和结构性能,并且在实际的无铅铁电传感器中具有潜在的应用前景。 (C)2015 Elsevier Ltd和Techna Group S.r.l.版权所有。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号