...
首页> 外文期刊>Radiation measurements >The glow curve structure for the LiF : Mg,Cu,Na,Si TL detector with dopants concentrations and sintering temperatures
【24h】

The glow curve structure for the LiF : Mg,Cu,Na,Si TL detector with dopants concentrations and sintering temperatures

机译:LiF的辉光曲线结构:具有掺杂剂浓度和烧结温度的Mg,Cu,Na,Si TL探测器

获取原文
获取原文并翻译 | 示例

摘要

The glow curve structures for LiF:Mg,Cu,Na,Si TL detectors with various dopant concentrations and sintering temperatures were investigated for the improvement of the glow curve structure and sensitivity of the TL detector. The dopant concentrations were varied over the following ranges: Mg (0-0.25 mol%), Cu (0-0.07 mol%), Na and Si (0-1.5 mol%). With increasing Cu concentration, the intensity of the main peak was intensified and reached a maximum at a concentration of 0.05 mol%. The high-temperature peak was reduced. The dependency of the main peak intensity on the Mg concentration exhibits a sharp maximum at 0.2 mol%. The intensity of the high-temperature peak tends to rise slightly with increasing Mg concentration. It was found that the optimum concentrations of the dopants in the LiF:Mg,Cu,Na,Si TL material are Mg: 0.2 mol%, Cu: 0.05 mol%, Na and Si: 0.9 mol%. The dependency of the main peak intensity on sintering temperature exhibits a very sharp maximum at 830degreesC. The high-temperature peak was rapidly reduced after 825degreesC. (C) 2004 Elsevier Ltd. All rights reserved.
机译:研究了不同掺杂浓度和烧结温度的LiF:Mg,Cu,Na,Si TL探测器的辉光曲线结构,以改善TL探测器的辉光曲线结构和灵敏度。掺杂剂浓度在以下范围内变化:Mg(0-0.25mol%),Cu(0-0.07mol%),Na和Si(0-1.5%mol)。随着Cu浓度的增加,主峰的强度增强并且在0.05mol%的浓度下达到最大值。高温峰降低。主峰强度对Mg浓度的依赖性在0.2mol%处显示出急剧的最大值。随着Mg浓度的增加,高温峰的强度倾向于略微升高。发现在LiF:Mg,Cu,Na,Si TL材料中的掺杂剂的最佳浓度是Mg:0.2mol%,Cu:0.05mol%,Na和Si:0.9mol%。主峰强度对烧结温度的依赖性在830℃时表现出非常尖锐的最大值。 825℃后,高温峰迅速降低。 (C)2004 Elsevier Ltd.保留所有权利。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号