...
首页> 外文期刊>Luminescence: The journal of biological and chemical luminescence >Structural characterization of Er3+,Yb3+-doped Gd2O3 phosphor, synthesized using the solid-state reaction method, and its luminescence behavior
【24h】

Structural characterization of Er3+,Yb3+-doped Gd2O3 phosphor, synthesized using the solid-state reaction method, and its luminescence behavior

机译:固态反应法合成掺Er3 +,Yb3 +的Gd2O3荧光粉的结构表征及其发光性能

获取原文
获取原文并翻译 | 示例
           

摘要

We report the synthesis and structural characterization of Er3+, Yb3+-doped Gd2O3 phosphor. The sample was prepared using the conventional solid-state reaction method, which is the most suitable method for large-scale production. The prepared phosphor sample was characterized using X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FTIR), thermoluminescence (TL), photoluminescence (PL) and CIE techniques. For PL studies, the excitation and emission spectra of Gd2O3 phosphor doped with Er3+ and Yb3+ were recorded. The excitation spectrum was recorded at a wavelength of 551 nm and showed an intense peak at 276 nm. The emission spectrum was recorded at 276 nm excitation and showed peaks in all blue, green and red regions, which indicate that the prepared phosphor may act as a single host for white light-emitting diode (WLED) applications, as verified by International de I'Eclairage (CIE) techniques. From the XRD data, the calculated average crystallite size of Er3+ and Yb3+-doped Gd2O3 phosphor is similar to 38 nm. A TL study was carried out for the phosphor using UV irradiation. The TL glow curve was recorded for UV, beta and gamma irradiations, and the kinetic parameters were also calculated. In addition, the trap parameters of the prepared phosphor were also studied using computerized glow curve deconvolution (CGCD). Copyright (C) 2015 John Wiley & Sons, Ltd.
机译:我们报告了Er3 +,Yb3 +掺杂的Gd2O3荧光粉的合成和结构表征。使用常规的固态反应方法制备样品,这是最适合大规模生产的方法。使用X射线衍射(XRD),扫描电子显微镜(SEM),透射电子显微镜(TEM),傅里叶变换红外光谱(FTIR),热致发光(TL),光致发光(PL)和CIE技术对制备的荧光粉样品进行表征。为了进行PL研究,记录了掺有Er3 +和Yb3 +的Gd2O3荧光粉的激发和发射光谱。激发光谱记录在551 nm的波长处,并在276 nm处显示一个强烈的峰。发射光谱是在276 nm激发下记录的,并且在所有蓝色,绿色和红色区域均显示出峰,这表明制备的磷光体可作为白色发光二极管(WLED)应用的单一基质,已由International de I验证。 'Eclairage(CIE)技术。根据XRD数据,计算出的掺Er3 +和Yb3 +的Gd2O3荧光粉的平均微晶尺寸约为38 nm。使用紫外线辐射对磷光体进行了TL研究。记录紫外线,β和γ辐照的TL辉光曲线,并计算动力学参数。此外,还使用计算机辉光曲线反褶积法(CGCD)研究了制备的磷光体的陷阱参数。版权所有(C)2015 John Wiley&Sons,Ltd.

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号