首页> 外文期刊>Laser and Particle Beams >Nano-structuring of solid surface by extreme ultraviolet Ar~(8+) laser
【24h】

Nano-structuring of solid surface by extreme ultraviolet Ar~(8+) laser

机译:极紫外Ar〜(8+)激光对固体表面的纳米结构

获取原文
获取原文并翻译 | 示例
           

摘要

This work demonstrates the patterning of polyinethylmethacrylate (PMMA) by ablation with Ar~(8+) ion laser (λ = 46.9 nm) pumped by pulse, high-current, capillary-discharge. For focusing a long-focal spherical mirror (R = 2100 mm) covered by 14 double-layer Sc-Si coating was used. The ablated focal spots demonstrate not only that the energy of our laser is sufficient for such experiments. but also that the design of focusing optics must be more sophisticated: severe aberrations were revealed - an irregular spot shape and strong astigmatism with astigmatic difference as large as 16 mm. In some cases, on the bottom of ablated spots a laser-induced periodic surface structure appeared. Finally, an illumination of the sample through quadratic hole 7.5 x 7.5 μm, standing in contact with PMMA substrate ablated from the surface a strongly developed two-dimensional diffraction pattern ( period in the center about 125 nm).
机译:这项工作演示了通过脉冲,高电流,毛细放电泵浦的Ar〜(8+)离子激光(λ= 46.9 nm)烧蚀对聚甲基丙烯酸甲酯(PMMA)的图案。为了聚焦,使用由14个双层Sc-Si涂层覆盖的长焦球面镜(R = 2100 mm)。烧蚀的焦点不仅表明我们的激光能量足以进行此类实验。而且聚焦光学系统的设计必须更加复杂:显示出严重的像差-不规则的光点形状和强像散,像散差最大为16 mm。在某些情况下,在烧蚀斑点的底部出现了激光诱导的周期性表面结构。最后,通过与MMA基板接触并从表面消融的7.5 x 7.5μm二次孔对样品进行照射,形成了强烈发展的二维衍射图(中心周期约为125 nm)。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号