Experimental investigation of an atmospheric photoconductively switched high-voltage spark gap - art. no. 043309

摘要

We report on the experimental investigation of the photoconductively switched gas-filled spark gap. When the laser intensity of a femtosecond laser is high enough (around 10(18) W m(-2)), a plasma can be created that spans the complete distance between the electrodes. The gas-filled spark gap is then closed on a femtosecond time scale, similar to photoconductive switching of a semiconductor switch. Stochastic breakdown processes, such as avalanche and streamer formation that cause the breakdown in laser triggered spark gaps, are passed over, which results in faster rise time and less jitter. Measurements of the switched pulses as a function of laser energy were performed in a 1-mm gap at an applied voltage of 4.5 kV. A clear transition from triggering to switching was measured with increased laser energy. Measurements of the output pulses with the gap filled with nitrogen at 1 atm showed results very similar to measurements in air in the same gap. In the switching regime, the amplitude of the switched pulse did not depend strongly on the laser energy. Measurements at lower applied voltages but with the same gap distance showed that it was possible to switch voltages as low as 10 of the self-breakdown voltage. At low applied voltages, a significant difference between the applied voltage and the output voltage is measured. A possible explanation is given based on the dynamic behavior of the laser-created plasma. The measured rise time and jitter of the switched pulses were both below the resolution of the measurement equipment, i.e., better than 100 and 15 ps, respectively. (c) 2005 American Institute of Physics.