EFFECT OF COOLING RATE ON MICROSTRUCTURE FORMATION DURING CRYSTALLIZATION OF ALUMINUM ALLOY 1417M

G M. Zeer; M. V. Pervukhin; E. G Zelenkova

首页> 外文期刊>Metal Science and Heat Treatment >EFFECT OF COOLING RATE ON MICROSTRUCTURE FORMATION DURING CRYSTALLIZATION OF ALUMINUM ALLOY 1417M

【24h】

EFFECT OF COOLING RATE ON MICROSTRUCTURE FORMATION DURING CRYSTALLIZATION OF ALUMINUM ALLOY 1417M

机译：冷却速率对1417M铝合金晶化过程中微观组织形成的影响

获取原文

获取原文并翻译 | 示例

获取外文期刊封面封底 >>

开具论文收录证明 >>

文献代查 >>

团队文献服务 >>

页面导航

摘要
著录项
引文网络
相似文献
相关主题

摘要

The effect of cooling rate on the microstructure of alloy 1417M during crystallization with electromagnetic influence and without it is studied. It is revealed that alloy 1417N crystallization under electromagnetic influence with a cooling rate of 900 K/sec provides dispersion of structural components and increased uniformity of the their distribution through an ingot cross section, which promotes an improvement in mechanical properties.

机译：研究了在没有电磁干扰的情况下，冷却速率对1417M合金组织的影响。揭示了合金1417N在电磁影响下以900K /秒的冷却速率结晶提供了结构成分的分散并且通过铸锭横截面增加了它们的分布的均匀性，这促进了机械性能的改善。

著录项

来源
《Metal Science and Heat Treatment》 |2011年第6期|共3页
作者
G M. Zeer; M. V. Pervukhin; E. G Zelenkova;
展开▼
作者单位

展开▼
收录信息
原文格式 PDF
正文语种 eng
中图分类金属学与热处理;
关键词
aluminum alloys; crystallization with electromagnetic influence; x-ray micro-energy-dispersion analysis; microstructure;

机译：铝合金;电磁影响下的结晶;X射线微能分散分析;显微组织;

相似文献

外文文献
中文文献
专利

1. EFFECT OF COOLING RATE ON MICROSTRUCTURE FORMATION DURING CRYSTALLIZATION OF ALUMINUM ALLOY 1417M [J] . G M. Zeer, M. V. Pervukhin, E. G Zelenkova Metal Science and Heat Treatment . 2011,第5a6期

机译：冷却速率对1417M铝合金晶化过程中微观组织形成的影响
2. Formation of Nano-Microstructured Aluminum Alloy Film Using Thermal Spray Gun with Ultra Rapid Cooling [J] . Shin Yoshio, Ohmori Yasuhiro, Morimoto Toshiharu, Materials transactions . 2016,第4期

机译：超快速冷却热喷涂枪形成纳米微结构铝合金薄膜
3. Influence of cooling rate on crystallization and microstructure of the monotectic Ni54Nb23Y23 alloy [J] . Mattern N, Loser W, Eckert J Philosophical Magazine Letters . 2007,第11期

机译：冷却速度对单晶Ni54Nb23Y23合金结晶和组织的影响
4. Formation of Globular Microstructure in A380 Aluminum Alloy by Cooling Slope Casting [C] . N. Saklakoglu, S. Gencalp, S. Kasman, Internation Conference on Advances in Materials and Processing Technologies . 2011

机译：冷却坡铸造A380铝合金球状微观结构形成
5. The effect of mischmetal, cooling rate and heat treatment on the microstructure and hardness of 319, 356, and 413 aluminum-silicon alloys. [D] . El Sebaie, Ossama. 2006

机译：混合金属，冷却速率和热处理对319、356和413铝硅合金的组织和硬度的影响。
6. Hot Deformation Behavior and Microstructure Evolution of 6063 Aluminum Alloy Modified by Rare Earth Y and Al-Ti-B Master Alloy [O] . Wanwu Ding, Xiaoxiong Liu, Xiaoyan Zhao, 2020

机译：稀土y和Al-Ti-B主合金改性6063铝合金的热变形行为和微观结构演化
7. Formation of Nano-Microstructured Aluminum Alloy Film Using Thermal Spray Gun with Ultra Rapid Cooling [O] . Yoshio Shin, Yasuhiro Ohmori, Toshiharu Morimoto, 2016

机译：用超快速冷却形成纳米微结构铝合金薄膜的形成

EFFECT OF COOLING RATE ON MICROSTRUCTURE FORMATION DURING CRYSTALLIZATION OF ALUMINUM ALLOY 1417M

摘要

著录项

引文网络

相似文献

相关主题

期刊订阅