Microstructural Evolution in the Heat-Affected Zone of a Friction Stir Weld

摘要

The microstructure and crystallographic texture spanning the soft region at the thermomechanically affected zone/heat-affected zone (TMAZ/HAZ) boundary of a friction stir weld in 2519 Al were systematically investigated to determine their contributions to the properties of that region. The microstructure was shown to be the primary cause of softening at the TMAZ/HAZ boundary. During welding, fine theta' precipitates responsible for much of the strength in this alloy coarsen and transform to the equilibrium theta phase in the HAZ and into the TMAZ, accounting for the observed softening through the HAZ region. The higher temperatures achieved in the TMAZ partially resolutionize the precipitates and allow the subsequent formation of Guinier-Preston (GP) zones during cooling. These two processes are responsible for the variation in microhardness observed in the TMAZ/HAZ region. Texture analyses revealed significant differences in the crystallographic texture across this region that were primarily due to macroscopic rigid-body rotations of the grains, but do not account for the observed softening. The effect of the observed microstructural evolutions on the friction stir welding (FSW) deformation field and on the fracture behavior of the weld are also discussed.