Cyclic strength of a natural liquefiable sand stabilized with colloidal silica grout

摘要

This paper summarizes the experimental results of a series of cyclic simple shear tests on liquefiable silty sand with and without sample improvement with colloidal silica grout. The objective of the paper is to evaluate the effectiveness of colloidal silica grouting in reducing the liquefaction potential of natural silty sand. Colloidal silica was selected as a stabilizing material due to its low viscosity, wide range of gel times, nontoxicity, and low cost. The soil tested in this experimental program is a poorly graded sand with 11.5% of nonplastic silt from the Port of Lazaro Cardenas, Mexico. Colloidal silica treated and untreated sand specimens show different pore pressure response and deformation behavior under cyclic loading in simple shear tests. The results indicate that, for a given initial relative density and initial effective vertical stress, liquefiable silty sand specimens stabilized with colloidal silica grout generally exhibit significant gain in liquefaction resistance compared with untreated specimens. It was also found that the colloidal silica grout reduces considerably the rates of pore pressure generation and shear strain of the silty sand specimens subjected to cyclic loading.