首页> 外文期刊>Canadian Geotechnical Journal >Strength and deformation behavior of red sandstone under multi-stage triaxial compression
【24h】

Strength and deformation behavior of red sandstone under multi-stage triaxial compression

机译:红砂岩多阶段三轴压缩下的强度和变形行为

获取原文
获取原文并翻译 | 示例
           

摘要

Based on multi-stage triaxial experimental results of red sandstone with circumferential deformation control, the influence of confining pressure on strength and deformation behavior of red sandstone under multi-stage triaxial compression is investigated. The results show that the confining pressure has an obvious effect on the deformation parameters of red sandstone under multi-stage triaxial compression. A multi-stage triaxial compression experiment with only one specimen can be used to confirm the peak strength of rock under different confining pressures. Under single-stage and multi-stage triaxial compression, the peak strength behavior of red sandstone agrees better with the nonlinear Hoek-Brown criterion than the linear Mohr-Coulomb criterion. However, the difference between single-stage and multi-stage triaxial strength changes with different post-peak deformation values, and the reason for the difference, is discussed. To predict single-stage triaxial strength using the obtained multi-stage triaxial strength with only one specimen, a new method is put forward to revise multi-stage triaxial strength of red sandstone, which testifies to being reasonable. The concluding remarks are very useful and significant for deep geotechnical and underground structural engineering.
机译:基于周向形变控制红砂岩多级三轴试验结果,研究了围压对多级三轴压缩下红砂岩强度和变形行为的影响。结果表明,围压对多阶段三轴压缩下红砂岩的变形参数有明显的影响。仅用一个标本进行的多阶段三轴压缩实验可以用来确定岩石在不同围压下的峰值强度。在单级和多级三轴压缩下,红砂岩的峰值强度行为与非线性的Hoek-Brown准则比线性的Mohr-Coulomb准则更好地吻合。然而,讨论了单级和多级三轴强度随峰后变形值的不同而不同的原因,并讨论了导致这种差异的原因。为了仅用一个试样就可以利用获得的多级三轴强度来预测单级三轴强度,提出了一种修正红砂岩多级三轴强度的新方法,证明是合理的。结论对深层岩土和地下结​​构工程非常有用,意义重大。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号