首页> 外文期刊>Macromolecular Research >Preparation of Ion Exchange Membranes for Fuel Cell Based on Crosslinked Poly(vinyl alcohol) with Poly(acrylic acid-co-maleic acid)
【24h】

Preparation of Ion Exchange Membranes for Fuel Cell Based on Crosslinked Poly(vinyl alcohol) with Poly(acrylic acid-co-maleic acid)

机译:基于交联聚乙烯醇与聚丙烯酸-马来酸的燃料电池离子交换膜的制备

获取原文
获取原文并翻译 | 示例
           

摘要

Crosslinked poly(vinyl alcohol) (PVA) membranes were prepared at various crosslinking temperatures using poly(acrylic acid-co-maleic acid) (RAM) containing different PAM contents.The thermal properties of these PVA/PAM membranes prepared at various reaction temperatures were characterized using differential scanning calorimetry (DSC).The proton conductivity and methanol permeability of PVA/PAM membranes were then investigated as PAM content was varied from 3 to 13 wt%.It was found that the proton and methanol transport were dependent on PAM content in their function both as crosslinking agent and as donor of hydrophilic -COOH groups.Both these properties decreased monotonously with increasing PAM concentration.The proton conductivities of these PVA/PAM membranes were in the range from 10~(-3) to 10~(-2) S/cm and the methanol permeabilities from 10~(-7) to 10~(-6) cm~2/sec.In addition,the effect of operating temperature up to 80degC on ion conductivity was examined for three selected membranes:7,9 and 11 wt% PAM membranes.Ion conductivity increased with increasing operating temperature and showed and S/cm at 80degC,respectively.The effects of crosslinking and ionomer group concentration were also examined in terms of water content,ion exchange capacity (IEC),and fixed ion concentration.In addition,the number of water molecules per ionomer site was calculated using both water contents and IEC values.With overall consideration for all the properties measured in this study,7-9 wt% PAM membrane prepared at 140degC exhibited the best performance.These characteristics of PVA/PAM membranes are desirable in applications related to the direct methanol fuel cell (DMFC).
机译:使用包含不同PAM含量的聚丙烯酸-顺丁烯二酸(RAM)在不同的交联温度下制备交联的聚乙烯醇(PVA)膜。在不同的反应温度下制备的PVA / PAM膜的热性能为利用差示扫描量热法(DSC)对PVA / PAM膜的质子传导率和甲醇渗透性进行了研究,发现PAM含量在3至13 wt%之间变化。它们既充当交联剂又充当亲水性-COOH基团的供体,但随着PAM浓度的增加,这些性质均单调下降。这些PVA / PAM膜的质子电导率范围为10〜(-3)至10〜(- 2)S / cm和甲醇渗透率从10〜(-7)到10〜(-6)cm〜2 / sec。此外,对于三个选定的样品,研究了高达80°C的工作温度对离子电导率的影响膜:7,9和11 wt%PAM膜。离子电导率随操作温度的升高而增加,并分别在80°C下显示和S / cm。还从水含量,离子交换容量方面研究了交联和离聚物基团浓度的影响(IEC)和固定的离子浓度。此外,使用水含量和IEC值计算每个离聚物位点的水分子数量。综合考虑本研究中测得的所有性能,制备了7-9 wt%的PAM膜PVA / PAM膜的这些特性在与直接甲醇燃料电池(DMFC)有关的应用中是理想的。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号