首页> 外文期刊>Fluid Phase Equilibria >Measurements and modeling of bubble points in binary carbon dioxide systems with tetrahydropyran and methylcyclohexane
【24h】

Measurements and modeling of bubble points in binary carbon dioxide systems with tetrahydropyran and methylcyclohexane

机译:四氢吡喃和甲基环己烷在二元二氧化碳系统中气泡点的测量和建模

获取原文
获取原文并翻译 | 示例
获取外文期刊封面目录资料

摘要

Using a Cailletet apparatus, bubble points in the binary systems of carbon dioxide with methylcyclohexane and tetrahydropyran, were measured. The temperature ranges from 263 up to 353 K, and pressures from 0.4 up to 11.5 MPa were applied. The experimental results were modeled using the predictive Soave-Redlich-Kwong and Universal-Quasi-Chemical (PSRK/UNIQUAC) method. The lacking binary interaction parameters of the UNIQUAC model were evaluated and reported. The average absolute deviations between the experimental and predicted bubble point pressures are 1.53 and 1.72% for the carbon dioxide + methylcyclohexane and the carbon dioxide + tetrahydropyran systems, respectively. (C) 2002 Elsevier Science B.V. All rights reserved. [References: 19]
机译:使用Cailletet设备,测量二氧化碳与甲基环己烷和四氢吡喃的二元体系中的气泡点。温度范围为263至353 K,施加的压力为0.4至11.5 MPa。实验结果使用预测的Soave-Redlich-Kwong和通用拟化学(PSRK / UNIQUAC)方法进行建模。评价并报告了UNIQUAC模型缺少的二进制交互参数。对于二氧化碳+甲基环己烷和二氧化碳+四氢吡喃系统,实验和预测的起泡点压力之间的平均绝对偏差分别为1.53和1.72%。 (C)2002 Elsevier Science B.V.保留所有权利。 [参考:19]

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号