首页> 外文期刊>Ferroelectrics: Letters Section >Structural, Dielectric and Magnetoelectric Properties of x Co0.8Ni0.2 Fe2O4 + (1-x) PbZr0.55Ti0.45O3 Composites
【24h】

Structural, Dielectric and Magnetoelectric Properties of x Co0.8Ni0.2 Fe2O4 + (1-x) PbZr0.55Ti0.45O3 Composites

机译:x Co0.8Ni0.2 Fe2O4 +(1-x)PbZr0.55Ti0.45O3复合材料的结构,介电和磁电性能

获取原文
获取原文并翻译 | 示例
获取外文期刊封面目录资料

摘要

In this paper, we are reporting structural, dielectric, ferroelectric and magnetic properties of polycrystalline composites (ferrite and ferroelectric) of PZT (PbZr0.55Ti0.45O3) + CNFO (Co0.8Ni0.2Fe2O4). The sample with composition x CNFO + (1-x) PZT (x = 0.00, 0.05, 0.10, 0.15 and 1.00) were prepared using the solid state double sintering method. Here the ratio x: (1-x) of two components is by weight. X-ray diffraction (XRD) studies show that lattice constant and tetragonality decreases with increasing ferrite content. Dielectric constant was found to decrease with increase in amount of CNFO. The value of tangent loss (tan) was reasonably low (< 0.04) for all the samples. Ferroelectric and ferrimagnetic behavior was confirmed by observing P-E and M-H hysteresis loop, respectively. The room temperature magnetoelectric coupling coefficient ( = dE/dH) was measured as a function of applied DC magnetic field. The value of was observed to be maximum (855 V/(cm.Oe)) at DC magnetic field of 1.7 kOe for sample with 5% CNFO. Value of piezoelectric coefficient d(33)' decreases from 133 to 60 pC/N.
机译:在本文中,我们报告了P​​ZT(PbZr0.55Ti0.45O3)+ CNFO(Co0.8Ni0.2Fe2O4)的多晶复合材料(铁氧体和铁电体)的结构,介电,铁电和磁性。使用固态双重烧结法制备具有x CNFO +(1-x)PZT(x = 0.00、0.05、0.10、0.15和1.00)组成的样品。在此,两种组分的比例x:(1-x)以重量计。 X射线衍射(XRD)研究表明,晶格常数和四方性随铁素体含量的增加而降低。发现介电常数随着CNFO量的增加而降低。所有样品的切线损耗(tan)值都相当低(<0.04)。通过分别观察P-E和M-H磁滞回线来确认铁电和亚铁磁行为。测量室温磁电耦合系数(= dE / dH)作为施加的直流磁场的函数。对于含5%CNFO的样品,在1.7 kOe的DC磁场下观察到的最大值为最大值(855 V /(cm.Oe))。压电系数d(33)'的值从133降至60 pC / N。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号