...
首页> 外文期刊>Ferroelectrics >High Dielectric and Electrical Properties of CuO Doped (Ba_(0.5)Sr_(0.5))TiO_3 Ceramics
【24h】

High Dielectric and Electrical Properties of CuO Doped (Ba_(0.5)Sr_(0.5))TiO_3 Ceramics

机译:CuO掺杂(Ba_(0.5)Sr_(0.5))TiO_3陶瓷的高介电和电性能

获取原文
获取原文并翻译 | 示例

摘要

The effects of CuO additions on the sintering temperature and dielectric properties of (Ba_(0.5)Sr_(0.5))TiO_3 ceramic have been investigated by employing X-ray diffraction analysis, scanning electron microscopy, and dielectric properties measurements. In this research, 1-5 wt% CuO was added to the (Ba_(0.5)Sr_(0.5))TiO_3 powders to reduce the sintering temperature. CuO-doped (Ba_(0.5)Sr_(0.5))TiO_3 ceramics were sintered from 750 to 1350℃ to confirm the sintering temperature with various dopants, respectively. It was found that the addition of CuO to (Ba_(0.5)Sr_(0.5))TiO_3 could lower the sintering temperature from 1350 to 1150℃ . Moreover high dielectric permittivity was observed in the 5 wt% CuO doped (Ba_(0.5)Sr_(0.5))TiO_3 ceramics.
机译:通过X射线衍射分析,扫描电子显微镜和介电性能测量,研究了CuO添加量对(Ba_(0.5)Sr _((0.5))TiO_3陶瓷烧结温度和介电性能的影响。在这项研究中,向(Ba_(0.5)Sr_(0.5))TiO_3粉末中添加1-5 wt%的CuO,以降低烧结温度。将CuO掺杂的(Ba_(0.5)Sr_(0.5))TiO_3陶瓷从750℃烧结到1350℃,以确认各种掺杂剂的烧结温度。结果表明,在(Ba_(0.5)Sr_(0.5))TiO_3中添加CuO可将烧结温度从1350℃降低到1150℃。此外,在掺杂了5 wt%CuO的(Ba_(0.5)Sr_(0.5))TiO_3陶瓷中观察到高介电常数。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号