首页> 外文期刊>European Polymer Journal >Preparation of UV-curable acryl resin for high refractive index based on 1,5-bis(2-acryloylenethyl)-3,4-ethylenedithiothiophene
【24h】

Preparation of UV-curable acryl resin for high refractive index based on 1,5-bis(2-acryloylenethyl)-3,4-ethylenedithiothiophene

机译:基于1,5-双(2-丙烯酰基乙基)-3,4-乙撑二噻吩基的高折射率紫外光固化丙烯酸树脂的制备

获取原文
获取原文并翻译 | 示例
           

摘要

A highly refractive and transparent photo-curable polymer resin containing 3,4-ethylenedithiothiophene units in the polymer chain has been developed. The polymer derived from 1,5-bis(2-acryloylenethyl)-3,4-ethylenedithiothiophene (BASEDTT) was prepared by photopolymerization using diphenyl(2,4,6-trimethylbenzoyl)phosphine oxide as a photo initiator under UV irradiation. The polymer exhibited high thermal properties, including a glass transition temperature (>134 degrees C), and a 5% weight loss temperature of 308 degrees C under nitrogen. The polymer also showed good optical properties, such as high optical transparency in the visible region, a low birefringence of 0.0043 and a high refractive index of 1.644 at 637 nm. (C) 2015 Elsevier Ltd. All rights reserved.
机译:已经开发出在聚合物链中包含3,4-亚乙基二噻吩并噻吩单元的高折射和透明的光可固化聚合物树脂。在紫外线辐射下,使用二苯基(2,4,6-三甲基苯甲酰基)氧化膦作为光引发剂,通过光聚合制备衍生自1,5-双(2-丙烯酰基乙基)-3,4-亚乙基二噻吩基(BASEDTT)的聚合物。该聚合物显示出高的热性能,包括玻璃化转变温度(> 134摄氏度)和氮气下5%的失重温度308摄氏度。该聚合物还显示出良好的光学性能,例如在可见光区域的高光学透明性,0.0043的低双折射和在637 nm处的高折射率1.644。 (C)2015 Elsevier Ltd.保留所有权利。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号