Method of constraint loss correction of CTOD fracture toughness for fracture assessment of steel components

摘要

This paper presents a procedure for transferring the CTOD fracture toughness obtained from laboratory specimens to an equivalent CTOD for structural components, taking constraint loss into account. The Weibull stress criterion is applied to correct the CTOD for constraint loss, which leads to an equivalent CTOD ratio, beta, defined as beta = delta/delta_(WP), where 8 and delta_(WP) are CTODs of the standard fracture toughness specimen and the structural component, respectively, at the same level of the Weibull stress. The CTOD ratio beta is intended to apply to the fracture assessment of ferritic steel components to stress levels beyond small-scale yielding. Nomographs are given to determine the beta-value as a function of the crack type and size in the component, the yield-to-tensile ratio of the material and the Weibull shape parameter m. Examples of the fracture assessment using p are shown within the context of a failure assessment diagram (FAD). An excessive conservatism observed in the conventional procedure is reduced reasonably by applying the equivalent CTOD ratio, beta.