...
首页> 外文期刊>Electrochimica Acta >Hybrid proton-conducting membranes for polymer electrolyte fuel cells Phosphomolybdic acid doped poly(2,5-benzimidazole) - (ABPBI-H{sub}3PMo{sub}12O{sub}40)
【24h】

Hybrid proton-conducting membranes for polymer electrolyte fuel cells Phosphomolybdic acid doped poly(2,5-benzimidazole) - (ABPBI-H{sub}3PMo{sub}12O{sub}40)

机译:聚合物电解质燃料电池用杂化质子传导膜磷钼酸掺杂的聚(2,5-苯并咪唑)-(ABPBI-H {sub} 3PMo {sub} 12O {sub} 40)

获取原文
获取原文并翻译 | 示例
           

摘要

The synthesis and characterization of a novel hybrid organic-inorganic material formed by phosphomolybdic acid H{sub}3PMO{sub}12O{sub}40(PMo{sub}12) and poly(2,5-benzimidazole) (ABPBI) is reported. This material, composed of two proton-conducting components, can be cast in the form of membranes from methanesulfonic acid (MSA) solutions. Upon impregnation with phosphoric acid, the hybrid membranes present higher conductivity than the best ABPBI polymer membranes impregnated in the same conditions. These electrolyte membranes are stable up to 200 ℃, and have a proton conductivity of 3 × 10{sup}(-2) S cm{sup}(-1)at 18.5 ℃ without humidification. These properties make them very good candidates as membranes for polymer electrolyte membrane fuel cells (PEMFC) at temperatures of 100-200 ℃.
机译:报道了由磷钼酸H {sub} 3PMO {sub} 12O {sub} 40(PMo {sub} 12)和聚(2,5-苯并咪唑)(ABPBI)形成的新型杂化有机-无机材料的合成与表征。这种由两个质子传导成分组成的材料可以由甲烷磺酸(MSA)溶液以膜的形式浇铸。在用磷酸浸渍后,杂化膜比在相同条件下浸渍的最佳ABPBI聚合物膜具有更高的电导率。这些电解质膜在高达200℃的温度下都是稳定的,并且在18.5℃且不加湿的情况下具有3×10 {sup}(-2)S cm {sup}(-1)的质子传导率。这些特性使它们非常适合在100-200℃的温度下用作聚合物电解质膜燃料电池(PEMFC)的膜。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号