A comparison of thermocouples and temperature paints to monitor spatial and temporal characteristics of landscape-scale prescribed fires.

摘要

A method to better monitor landscape-level fire characteristics is presented. Three study areas in southern Ohio oak-hickory (Quercus-Carya) forests were established with four treatment areas of ~20 ha each: control (C), burn only (B), thin only (T) or thin plus burn (TB). Two independent measures useful for qualitatively characterising fire intensity were established on a 50-m grid, resulting in over 120 sampling locations at each site, in the burned areas: aluminium tags painted with temperature-sensitive paints, and logger-probe units that logged probe temperature every 2 s during burns. Fires were conducted in spring 2001. The logger-probe units allowed five measures qualitatively related to fire intensity or timing to be calculated at each grid point: maximum probe temperature; duration of probe temperature above 30 degrees C; a heat index, defined as the summed temperatures above 30 degrees C; time of maximum temperature; and estimated rate of spread. Maximum temperatures recorded by the two measuring systems were highly correlated (r2=0.83). Relative to painted tags, logger-probe units provide information useful for assessing some other components of fire behaviour. The temporal recording of temperatures allowed us to prepare a web-based simulation of the fires. Heat index and rate of spread estimates provided additional fire information. The TB units consistently burned cooler than the B units, perhaps because of uncured slash and a disrupted fuel bed in those units..