Effects of prior damage on the creep failure behaviour of similar and dissimilar welded CrMoV main steam pipes incorporating a partial repair

摘要

Creep damage finite element analyses, with the inclusion of "prior damage", were performed for partially-repaired circumferential welds in a thick-walled, main steam, CrMoV pipe. The repair consists of aged parent material, weld metal and one HAZ region being partially excavated and replaced by new weld metal. The pipe welds were subjected to realistic internal pressure and uniform axial loading, the magnitude of the latter being up to that allowed by design codes. The material properties used are related to those of a CrMoV weldment at 640 ℃. It is assumed that a full post-weld heat treatment has been carried out and that the effects of welding induced residual stresses reduce to negligible levels. The results obtained are used to examine the subsequent performance for "similar" and "dissimilar" welds with a range of "repair times" (defined as prior damage levels), magnitudes of axial (system) load, etc. From these results, the failure behaviour of this particular partial repair case was evaluated and discussed.