首页> 外文期刊>International Journal of Pharmaceutics >Rheological, mechanical and mucoadhesive properties of thermoresponsive, bioadhesive binary mixtures composed of poloxamer 407 and carbopol 974P designed as platforms for implantable drug delivery systems for use in the oral cavity.
【24h】

Rheological, mechanical and mucoadhesive properties of thermoresponsive, bioadhesive binary mixtures composed of poloxamer 407 and carbopol 974P designed as platforms for implantable drug delivery systems for use in the oral cavity.

机译:由泊洛沙姆407和carbopol 974P组成的热响应性生物粘附性二元混合物的流变,机械和粘膜粘附特性​​,被设计为用于口腔中可植入药物输送系统的平台。

获取原文
获取原文并翻译 | 示例
获取外文期刊封面目录资料

摘要

This study described the formulation and characterisation of the viscoelastic, mechanical and mucoadhesive properties of thermoresponsive, binary polymeric systems composed of poloxamer (P407) and poly(acrylic acid, C974P) that were designed for use as a drug delivery platform within the oral cavity. Monopolymeric and binary polymeric formulations were prepared containing 10, 15 and 20% (w/w) poloxamer (407) and 0.10-0.25% (w/w) poly(acrylic acid, 934P). The flow rheological and viscoelastic properties of the formulations were determined using controlled stress and oscillatory rheometry, respectively, the latter as a function of temperature. The mechanical and mucoadhesive properties (namely the force required to break the bond between the formulation and a pre-hydrated mucin disc) were determined using compression and tensile analysis, respectively. Binary systems composed of 10% (w/w) P407 and C934P were elastoviscous, were easily deformed under stress and did not exhibit mucoadhesion. Formulations containing 15 or 20% (w/w) Pluronic P407 and C934P exhibited a sol-gel temperature T(sol/gel), were viscoelastic and offered high elasticity and resistance to deformation at 37 degrees C. Conversely these formulations were elastoviscous and easily deformed at temperatures below the sol-gel transition temperature. The sol-gel transition temperatures of systems containing 15% (w/w) P407 were unaffected by the presence of C934P; however, increasing the concentration of C934P decreased the T(sol/gel) in formulations containing 20% (w/w) P407. Rheological synergy between P407 and C934P at 37 degrees C was observed and was accredited to secondary interactions between these polymers, in addition to hydrophobic interactions between P407 micelles. Importantly, formulations composed of 20% (w/w) P407 and C934P exhibited pronounced mucoadhesive properties. The ease of administration (below the T(sol/gel)) in conjunction with the viscoelastic (notably high elasticity) and mucoadhesive properties (at body temperature) render the formulations composed of 20% (w/w) P407 and C934P as potentially useful platforms for mucoadhesive, controlled topical drug delivery within the oral cavity.
机译:这项研究描述了由泊洛沙姆(P407)和聚丙烯酸(C974P)组成的热响应性二元聚合物体系的粘弹性,机械和粘膜粘附特性​​的配方和表征,这些体系被设计用作口腔内的药物递送平台。制备了包含10、15和20%(w / w)泊洛沙姆(407)和0.10-0.25%(w / w)聚丙烯酸(934P)的单聚合物和二元聚合物制剂。分别使用受控应力和振荡流变法测定制剂的流动流变学和粘弹性,后者是温度的函数。分别使用压缩和拉伸分析来确定机械和粘膜粘附性能(即,打破制剂和预水合粘蛋白盘之间的键所需的力)。由10%(w / w)P407和C934P组成的二元体系是弹性的,在压力下很容易变形,没有粘膜粘附。含有15%或20%(w / w)Pluronic P407和C934P的配方表现出溶胶-凝胶温度T(sol / gel),粘弹性并在37摄氏度时具有高弹性和抗变形性。相反,这些配方具有弹性和易变性在低于溶胶-凝胶转变温度的温度下变形。含有15%(w / w)P407的系统的溶胶-凝胶转变温度不受C934P的影响;但是,增加C934P的浓度会降低含有20%(w / w)P407的制剂中的T(溶胶/凝胶)。观察到P407和C934P在37摄氏度之间的流变协同作用,并且证明了这些聚合物之间的次级相互作用以及P407胶束之间的疏水相互作用。重要的是,由20%(w / w)的P407和C934P组成的配方表现出明显的粘膜粘附特性​​。易于给药(低于T(溶胶/凝胶))与粘弹性(特别是高弹性)和粘膜粘附特性​​(在体温下)相结合,使得由20%(w / w)P407和C934P组成的配方具有潜在用途用于在口腔内进行粘膜粘附,控制局部药物输送的平台。

著录项

相似文献

  • 外文文献
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号