Influence of Hole on Yield Strength and Ultimate Strength of Perforated Aluminium 1050A Sheets

Venkatachalam G.; Nishant K.; Utkarsh S. A.; Mathur V. S.; Akshay G.

首页> 外文期刊>International Journal of Applied Engineering Research >Influence of Hole on Yield Strength and Ultimate Strength of Perforated Aluminium 1050A Sheets

【24h】

Influence of Hole on Yield Strength and Ultimate Strength of Perforated Aluminium 1050A Sheets

机译：孔对穿孔铝1050A板材屈服强度和极限强度的影响

获取原文

获取原文并翻译 | 示例

掌桥外文数据库（机构版） >>

开具论文收录证明 >>

文献代查 >>

页面导航

摘要
著录项
相似文献
相关主题

摘要

Yield strength and ultimate tensile strength of a material are the important properties in sheet metal forming applications. These properties decide the plastic deformation and failure of sheet metals in sheet metal forming applications. In perforated sheet metal, these properties are affected by presence of holes. An attempt is made here to study the influence of open area and hole diameter on effective yield strength and effective ultimate tensile strength of aluminium 1050A sheets.

机译：材料的屈服强度和极限拉伸强度是钣金成型应用中的重要属性。这些特性决定了钣金成形应用中钣金的塑性变形和破坏。在穿孔金属板中，这些性能会受到孔的影响。此处尝试研究开口面积和孔径对铝1050A板的有效屈服强度和有效极限拉伸强度的影响。

著录项

来源
《International Journal of Applied Engineering Research》 |2013年第4期|共8页
作者
Venkatachalam G.; Nishant K.; Utkarsh S. A.; Mathur V. S.; Akshay G.;
展开▼
作者单位

展开▼
收录信息
原文格式 PDF
正文语种 eng
中图分类工程基础科学;
关键词

相似文献

外文文献
中文文献
专利

1. Influence of Hole on Yield Strength and Ultimate Strength of Perforated Aluminium 1050A Sheets [J] . Venkatachalam G., Nishant K., Utkarsh S. A., International Journal of Applied Engineering Research . 2013,第4期

机译：孔对穿孔铝1050A板材屈服强度和极限强度的影响
2. Influence of Ti and Nb on the Strength–Ductility–Hole Expansion Ratio Balance of Hot-rolled Low-carbon High-strength Steel Sheets [J] . Kyohei Kamibayashi, Yutaka Tanabe, Yoshito Takemoto, ISIJ international . 2012,第1期

机译：Ti和Nb对热轧低碳高强度钢板强度-延性-孔膨胀比平衡的影响
3. Modeling the effects of hole distribution in perforated aluminum sheets II: minimum strength failure paths [J] . Jia S., Povirk GL. International Journal of Solids and Structures . 2002,第9期

机译：模拟穿孔铝板中孔分布的影响II：最小强度破坏路径
4. Influence of hole shape and pattern on the prediction of limiting strain for perforated commercial pure aluminium sheets [C] . Venkatachalam G., Narayanan S., Patel Nilay, International Conference on Mechanical and Aerospace Engineering . 2012

机译：孔形状与图案对穿孔商业纯铝板限制应变预测的影响
5. Investigation of Strength-Enhancement Mechanism and Size Effect on Ultimate Shear Strength of Steel Fiber-Reinforced Concrete (SFRC) Slender Beams [D] . Zarrinpour, Mohammad Reza. 2016

机译：钢纤维钢筋混凝土（SFRC）纤维梁极限剪切强度的强度增强机理和大小效应研究
6. High-Tensile Strength Tapes Show Greater Ultimate Failure Load and Less Stiffness Than High-Tensile Strength Sutures in a Subpectoral Biceps Tenodesis Porcine Model [O] . Chih-Kai Hong, Wei-Ren Su, Fa-Chuan Kuan, 2020

机译：高抗拉强度磁带显示出更大的最终故障负载和比在副卵戊二头肌植物猪模型中的高抗拉强度缝合线的较高刚度
7. The relevance of the parameter yield strength to ultimate tensile strength ratio in sheet metal forming operations and a note on the importance of anisotropy in engineering applications [O] . 1966

机译：钣金成形操作中参数屈服强度与极限抗拉强度比的相关性，以及在工程应用中注意各向异性的重要性的注意事项
8. An analysis of the stability and ultimate compressive strength of short sheet-stringer panels with special reference to the influence of the riveted connection between sheet and stringer [R] . Semonian, Joseph W, Peterson, James P 1955

机译：短板桁架板的稳定性和极限抗压强度分析，特别是板材与桁条之间铆接连接的影响

Influence of Hole on Yield Strength and Ultimate Strength of Perforated Aluminium 1050A Sheets

摘要

著录项

相似文献

相关主题

期刊订阅