In Vitro Biomechanical and Histological Assessment of Pilot Hole Diameter for Positive‐Profile External Skeletal Fixation Pins in Canine Tibiae

摘要

This study was conducted to evaluate the effect of pilot hole (PH) diameter (0, 1.5, 2.0, 2.7, 3.1, 3.3, 3.5, and 3.7 mm) on the biomechanical and microstructural performance of positive‐profile threaded external skeletal fixation pins (3.18 mm inner diameter, 3.97 mm outer diameter) using cadaveric canine tibiae. Eight pins per pilot hole diameter (four pins per bone) were used to assess differences in end‐insertional torque and pin pull‐out strength. Histological evaluation of eight bicortical pin tracts per pilot hole diameter was accomplished using computer‐interfaced videomicroscopy on specimens processed using a bulk‐staining technique. Compared with no predrill, use of 2.7 mm PH increased end‐insertional torque and pull‐out strength by 25 and 13.5, respectively. No significant differences were observed in biomechanical variables for the PH diameter range of 2.0 to 3.1 mm. Compared with no predrill, use of a 3.1 mm PH increased thread area by 18. Microfracturing around the threads decreased as PH diameter increased. Damage to the interface at the entry and exit sites of both near and far cortices also decreased as PH diameter increased. It was concluded that predrilling a PH whose diameter approximates, but does not exceed the inner diameter of the positive profile pin will not only improve initial pin stability compared with no predrilling, but it will also reduce microstructural damage that may lead to excessive bone resorption and premature