Mechanical, Thermal and Viscoelastic Behavior of Nylon 6/Clay Nanocomposites with Cotreated Montmorillonites

摘要

Nylon 6 nanocomposites were prepared using melt intercalation technique. Sodium montmorillonite (Na-MMT) was modified with octadecyl ammonium salt to evaluate the effect of clay modification on the performance of the nanocomposites. A comparative account with the nanocomposites prepared, using commercial clay cloisite 30B has been presented. X-ray diffraction (XRD) studies indicated an increase in the basal spacing of organically modified clays. Further, X-ray diffractograms of the nanocomposites displayed the absence of basal reflections suggesting the formation of an exfoliated structure. Transmission electron microscopy (TEM) investigations also confirmed exfoliation of clay galleries in the nanocomposites. Differential scanning calorimetry (DSC) measurements revealed both y and a transitions in the matrix polymer as well as the nanocomposites. The crystallization temperature (T_c) exhibited a marginal increase in the C30B/Nylon 6 nanocomposites. Thermal stability of virgin Nylon 6 and the nanocomposites has been investigated using thermogravimetric analysis. Mechanical test revealed an increase in the tensile and flexural properties of Nylon 6 with the incorporation of nanoclays. Storage and loss modulus of virgin matrix increased with the incorporation of nanoclays. C30B/Nylon 6 nanocomposites exhibited optimum performance at 5 clay loading. Further, water absorption studies also confirmed comparatively lesser tendency of water uptake in these nanocomposites.