ABSTRACT:The black disk method for measuring visual water clarityin situis becoming established as a simple but robust method for optically characterizing natural waters. However, in spite of its virtues, the method is limited by a practical visibility minimum of around 0.1 m and the requirement for direct access to the water body at a point where there is adequate lighting for the visual observations. A method has been devised for measuring black disk clarity off‐site on samples of waters, diluted if necessary, and contained in a trough constructed of galvanized steel. In 23 streams, rivers, and lakes of diverse optical and physical character, measurements of visual clarity of water samples contained in troughs agreed closely within situmeasurements and correlated well (inversely) with the beam attenuation coefficient measured by transmissometer. Therefore, at sites wherein situmeasurement is difficult, visual clarity of waters can be measured offsite on a water sample. Furthermore, the visibility of samples diluted with tap water of known clarity was predictable from a simple balance on light attenuation. This means that useful visual clarity measurements on very turbid waters and effluents can be made in a trough containing volumetrically diluted samples, so extending application of the black disk method to very low visual range
展开▼
