AbstractThe rheological behavior of partially hydrolyzed poly(vinyl acetate‐co‐ethylene) (VAE) was investigated, using a Rheometrics Dynamic Mechanical Spectrometer. For the investigation, measurements of storage modulus (G′), loss modulus (G″) and loss tangent (tan δ) of the materials were recorded as functions of temperature at a fixed frequency (i.e., using temperature scans) and, also, as functions of frequency at a fixed temperature (i.e., using frequency scans). For the hydrolysis, three different grades of copolymer (containing 34, 47, 62 mol of vinyl acetate) were used to yield poly(vinyl acetate‐co‐ethylene‐co‐vinyl alcohol) (VAEOH) with varying amounts of hydroxyl group. For comparison purposes, the viscoelastic properties of blends of VAE copolymer with poly(vinyl alcohol) (PVOH), having varying blend compositions, were also measured. The blends were prepared by first mixing a solution of VAE copolymer, which was dissolved in a toluene/dichloroethane mixed solvent, and an aqueous solution of PVOH, and then freeze drying the mixture to a constant weight. Also measured were the glass transition temperature (Tg) of the VAE copolymers and theTgand melting point (Tm) of the VAEOH terpolymers, using a DuPont Thermal Analyzer equipped with a 910 DSC Module. It has been found that (1) introduction of hydroxyl group into the backbone of the amorphous VAE copolymer has made the resulting VAEOH terpolymer semicrystalline; (2) theTm,Tg,G′, and the complex viscosity (η*) of the VAEOH terpolymers increase with increasing amounts of hydroxyl group; (3) the physical blending of PVOH with VAE copolymer has not affected theTgof the VAE copolymer; (4) theG′and η*of the VAE/PVOH blends are found to increase with the amount of PVOH in the blend. The use of logarithmic plots ofG′versusG″has been found to be very useful for discerning the differences in the structu
展开▼
